Assembly Instructions

  1. Open package and read all literature.
  2. Install spark igniter.
    • Loosen set screw on flicker knob and remove.

  • Unscrew nut, remove steel bracket and discard.
  • Slide igniter through the end of the chamber and out the drilled hole.
  • Replace the nut and tighten.
  • Replace the flicker knob and tighten set screw.
  • Insert barrel into the front chamber cavity, with muzzle knife facing out.
  • You're done. Time to mash some potatoes.

Sorry, there are no products matching your search.